鑄銅雕塑和其他雕塑材料不同，它是一個材料轉換的過程。山東雕塑公司分析稱，每一件鑄銅作品都至少經過八道以上的工序才能制作完成，是集合傳統工藝和現在技術的混合藝術品。
1.制作小泥塑(泥塑的造型好壞、神韻的體現與否、意圖的表達呈現直接影響今后的產品好壞,所以?xún)?yōu)秀的泥塑離不開優秀的泥塑師)。Making small clay (embodiment of clay modeling, good or bad, verve, express the intention of the present directly affect future product is good or bad, so fine clay is inseparable from the fine clay Division).
2.上大泥覆蓋雕塑造型。Sculpture on the mud cover.
3.制作泥雕原型。Making mud sculpture prototype.
4.雕塑大型完成,通知甲方對大造型進行審核和提出意見或修改。Large scale completion of the sculpture, notify the Party of the large shape of the audit and make comments or changes.
5.進入翻制階段,在泥塑上用切片進行區塊模具分割設計,然后噴灑肥皂水作為隔離防護。Turn into the stage, with sections of mould design in clay block segmentation, and then spraying soap water as isolation protection.
6.脫模后去掉分塊模具上的殘留泥,完畢后對石膏模進行細致修模,補磨。然后用金屬銅網進行打磨。After the mold release, remove the residual mud from the mold. After the completion of the mold, the plaster mold is carefully repaired. And then polished with metal copper mesh.
7.鑄造。Casting.
8.產品鑄件修整及處理(對鑄造出來的銅產品作噴砂及清潔,并作切割,研磨、熱處理、整形、機加工、拋光等最后處理)。Product casting finishing and treatment (for cast out of the copper products for blasting and cleaning, and for cutting, grinding, heat treatment, plastic, machining, polishing, etc.).